Brother RHLL3210CW

Compact digital color printer is ideal for home or small offices. Brother Genuine high-yield replacement toner cartridges help lower printing costs. The 250-sheet capacity adjustable paper tray means fewer refills. Print wirelessly from your desktop, laptop, smartphone and tablet.

Resolution: Up to 2400 x 600 dpi. Recommended monthly page volume: Up to 30000 pages. Print up to 19 pages per minute.

Brother RHLL3210CW Replacement cartridges

  • TN223BK Standard Yield Black
  • TN223C Standard Yield Cyan Toner Cartridge (1300 pages)
  • TN223M Standard Yield Magenta Toner Cartridge (1300 pages)
  • TN223Y Standard Yield Yellow Toner Cartridge (1300 pages)
  • TN227BK High Yield Black Toner Cartridge (3000 pages)
  • TN227C High Yield Cyan Toner Cartridge (2300 pages)
  • TN227M High Yield Magenta Toner Cartridge (2300 pages)
  • TN227Y High Yield Yellow Toner Cartridge (2300 pages)

How to change the toner cartridge Brother RHLL3210CW printer

Replace the toner cartridge if you receive a message on the printer.

  1. Make sure the machine is turned on.
  2. Open the top cover until it locks in the open position.
  3. Remove the toner cartridge and drum until assembly for the color shown on the LCD.
  4. Push down the green lock level and remove the toner cartridge from the drum unit.
  5. Unpack the new toner cartridge.
  6. Remove the protective cover.
  7. Insert the new toner cartridge firmly into the drum unit you hear it lock into place.
  8. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times. Repeat this for all the corona wires.
  9. Slide the toner cartridge and drum unit assemblies into the machine. Make sure that you match the toner cartridge color to the same label on the machine.
  10. Close the machine's top cover.

After replacing a toner cartridge, do not turn off the printer or open the top cover until the printer's display returns to Ready Mode.

Brother RHLL3210CW Firmware

BRAdmin Prefessional is an application for managing printers and monitoring their status.

How to perform firmware upgrades.

  1. Select printer from the Device list.
  2. Click Update firmware.
  3. Select the Update to the latest version check box.
  4. Type the device password if it's password-pretected device.
  5. Click Start.

If the latest firware is available, the application downloads it and updates the printer's firmware automatically.