Epson SureColor F170

The complete dye-sub print solution for easy, high-quality results right from the start

Ink for Epson SureColor F170

Ink Type: Epson T49M Ink Bottles

Ink Palette: 4-color (C, M, Y, K)

Replacement Ink:

  • Black Ink Bottle T49M120
  • Cyan Ink Bottle T49M220
  • Magenta Ink Bottle T49M320
  • Yellow Ink Bottle T49M420

Epson SureColor F170 Refilling Ink Tanks

  1. Open the printer cover with both hands until it locks
  2. Open the ink tank cover
  3. Open the cap of the ink tank
  4. Make sure the ink bottle cap is closed securely
  5. Share the ink bottle 15 times within five seconds
  6. While holding the ink bottle upright, turn the cap slowly to remove it
  7. Check the upper line in the ink tank
  8. Align the top of the ink bottle with the filling port, and then insert it straight into the port to fill ink until it stops automatically at the upper line
  9. When you have finished filling the ink, remove the ink bottle
  10. Close the ink tank cap securely
  11. Close the ink tank cover firmly
  12. Close the printer cover
  13. Follow the on-screen instructions to set the ink level of the color of the ink you refilled

Epson SureColor F170 Software

Epson SureColor F170 Web Config

Web Config is an application that runs in a web browser, such as Chrome or Firefox or Safari on a computer or smart device. You can confirm the printer status or change the network service and printer settings. To use the Web Config, connect the printer and the computer or smartphone to the same network.

Run Epson SureColor F170 Web Config

  1. Check the printer's IP address. Select the network icon on the printer's home screen and then select the active connection method to confirm the printer's IP address
  2. Launch a Web browser form a computer or smart phone, and then enter the printer's IP address. For example: http://192.168.100.201

Update Epson SureColor F170 Firmware

EPSON Software Updater is an application that installs new software, and updates firmware over the internet. If you want to check for update information regulary, you can set the interval for checking for updates in EPSON Software Updater's Auto Update Settings.
If the printer is connected to the Internet, you can update the printer's firmware using the control panel. You can also set the printer to regulary check for firmware updates and nofity you if any are available.