Xerox D136 printer

Print faster. Print for less. Thrill your customers. Perfect for printing-intensive environments, such as pay-for-print shops and book publishing, the Xerox® D136 Copier/Printer was engineered for superior performance, renowned Xerox dependability and ease-of-use, plus state of the art finishing capabilities and the ability to add industry-leading integrated workflow-optimization solutions. Monochrome printing and copying, color scanning, Print-from- and Scan-to-USB. You’ll get a simple workflow with an easy-to-use touch screen, excellent features and a small footprint.

Print Resolution: Up to 2400 x 2400 dpi

Standard paper capacity: 4,050 sheets

Xerox D136 Toner Replacement

  • Xerox D136 Black Toner Cartridge. The 006R01668 toner cartridge yields approximately 65,000 pages.

How to change the toner cartridge Xerox D136 printer

Replace a toner cartridge while the machine is ON. Before replacing a cartridge, ensure that the machine is given time to cool down. Failure to do so may result in burns to the skin if certain parts of the machine are touched.

  1. Open the left cover of the machine.
  2. Lay paper on the floor before removing the cartridge. This will allow any excess toner to fall on the paper.
  3. Grash the handle of the toner cartridge.
  4. Pull out the toner cartridge slowly, while holding the bottom of the cartridge with one hand.
  5. Dispose the old toner cartridge as normal office waste or recycle the cartridge.
  6. Remove the new cartridge from the box and shake if from side to side to even out the toner inside.
  7. Hold the cartridge with the arrow mark facing up.
  8. Push the cartridge in slowly until it stops.
  9. Close the toner cover. If the cover does not close completely, make sure the cartridge is in the lock position and is installed into the appropriate toner location.

How to replace the toner waste container Xerox D136 printer

A message displays on the UI when the toner waste container is full. If you continue copying or printing without replacing it, the machine stops after copying or printing (approximately 18,000 sheets).

  1. Make sure that the machine has stopped copying/printing, then open the front cover on the machine.
  2. Open the toner waste container cover and push the lever down.
  3. Grasp the handle of the toner waste container with one hand, and pull it out of the machine about half way.
  4. With the other hand, grasp the top, middle part of the bottle, and then using both hands, pull the entire container out of the machine.
  5. Hold the used container firmly with both hands and put it into the plastic bag, which is provided with the new container. Close the bag and dispose of the container according to your local regulations.
  6. Remove the new container from its packaging.
  7. Do not grip the container handle. Grasp the top, middle part of the new container and slide it into the machine until it snaps into position.
  8. Close the toner waste container cover.
  9. Close the front cover.

Basic copy using Xerox D136

  1. Adjust the movable document guides to their widest position.
  2. Load the documents face up with the first page on top and with the headings toward the back or left of the machine. The confirmation indicator lights to show that the documents are loaded correctly.
  3. Press the Services Home button.
  4. Select Copy on the Services Home screen.
  5. From the Copy screen, select the desired features/options. The features displayed on the main Copy screen vary depending on how the main Copy screen is configured by the administrator.
  6. Enter the quantity.
  7. Press Start.